How to take care of your gate or garage door so that it lasts as long as possible and you don't have to call the service now and then? It's not difficult, but you still need to think about a few things. We've written everything down for you.

The better the components, the less work

A quality drive is essential for gates and doors. Therefore, rely on proven drive manufacturers such as Somfy, Hormann, or Nice, and you will only need professional Garage Door Repair Dubai service in exceptional cases.

Sometimes our customers put something on the drive with good intentions – they paint it with something to “protect” it. However, this layer then hardens, dirt sticks to it, and it does much more harm than good. Therefore, always follow the manufacturer’s instructions and do not do anything extra.

Garage door maintenance: regularly test whether they are working properly

The door has a slightly more complex system,m and if it cannot open and close smoothly, the garage door drive will fail. Sectional doors most often have a problem with weak springs. Over time, they wear out, weaken, and cannot support the weight of the door. Garage doors then suffer from malfunctions.

Therefore, once in a while, test whether the springs and the entire system are working properly. How to do it? Open the door halfway, unlock the drive, and see if the door stays in the same place. Has it slid down a bit? Then something is wrong, and it needs service. You'd better not put it off, or you'll have to invest in repairing the drive as well.

Clean the door, including the rails and seals, every 3-6 months to prevent it from getting stuck due to accumulated dirt. Clean the rails and seals with a dry cloth, and the door surface with water and only ordinary detergent. Any solvents, alcohol, or abrasives could easily damage the door.

Entrance gate maintenance: first of all, clean the surroundings

The area in which the gate moves must always be clean. Therefore, regularly remove leaves in the fall and snow in the winter. Not only around the entrance, but also in the entire area that the gate reaches when opening.

Always clean leaves, mud, and snow from the rail. In winter, ice can form on the rail, which can be a problem for the operation of the gate. If you are unable to melt the ice yourself, you will need to call a service technician to thoroughly clean the rail. Otherwise, the gate will jam and may even be damaged.

How often and with what should you lubricate your gate and garage door?

Be careful, never lubricate the rails on gates or doors. It is unnecessary and will only cause dirt to stick to them.

Always lubricate the wheel axles, springs, hinges, nd bearings of the garage door (if they are not plastic). For swing and folding gates, lubricate the hinges and gear mechanism; for sliding gates, only the guide roller.

And how and with what to lubricate the gate and gate? It is enough to apply a little oil (such as motor oil) or Vaseline to the mentioned parts twice a year. But always read the maintenance instructions from the manufacturer carefully. Each gate may need something a little different.

Have you noticed that sliding gates are the easiest to maintain? Now you can even handle the assembly yourself. The manufacturers recently introduced complete sets for making a sliding gate, including the structure. Just take a set of tools, assemble everything, and your gate is ready.

Guard your remote control like the apple of your eye

Buying a new remote is an unpleasant hassle that can be easily avoided. Just take a little care of your old one. Here are some of our tips:

•           Be careful not to drop it into snow or water.

•           Do not place the remote control on a key ring where it can be easily damaged.

•           Some suppliers offer remote control cases or car screen holders, so take advantage of that.

Recommended Service: Garage Door Repair Dubai